SHORT SPECIFICATION 
 
With Manual Timer
 Tank Capacity:5 Liter
 Blower Motor :>26000 RPM
 Control Valve: One Turn Brass Valve
 Practical Size: 0.5-30
 Visible Fog Range- 10-15 ft.
 
PRODUCT  SPECIFICATION 
 
SS Body  Fogger Provides Excellent Control Of Droplet Size, Even For Near-Invisible 0.5-10 Micron Droplets Needed By Concentrated ULV Chemicals. 
The  Fogger Can Treat 20-4,000 Cubic Feet Per Minute, Reducing Application Time And Labor-Costs. And When You Need High Output And Large Droplets, The Fogger Is Just As Effective. 
It Can Deliver Up To 150 Ml/Min In A Mist Of Large (30 Micron) Droplets Used In Humidification, Dust Abatement And Sanitizing Work. The Advanced  Fogger Can Apply Either Oil- Or Water-Based Chemicals. And It’s Easy To Calibrate When Changing Liquids.
This Machine Atomizes Liquid Into A Fog, Mist Or Spray Of Small Droplets, It Can Atomize Both Water Based Solutions Well.
 
TYPICAL USES OF FOGGING MACHINE INCLUDES 
 
Humidification (Fogging Water) 
Odour Control (Fogging Odour Neutralizers, Scents Or Masking Chemicals) 
Applications Of Insecticides 
 Application Of Germicides Or Sanitizing Chemicals For Cleaning & Sanitation Purposes 
Control Of  Mold And Mildew (Applying Spermicides, Fungicides Or Anti-Mildew Chemicals)
 
HOW TO USE  
 
Add Chemical Solution To The Liquid Tank. 
Plug The Fogger Power Cord Into A Grounded Power Outlet. 
Using The Calibrated Flow Rate And Dosage Instructions Provided By The Chemical Manufacturer, Calculate The Time Required To Properly Fog The Area. 
Adjust The Angle Of The Fogger Power Head For The Space You Are Treating (Point The Nozzle Slightly Up For Max Distance) 
Aim The Fog Output Towards Area Requiring Treatment. For Space Fogging Select The Direction Of Greatest Clearance So Fog Droplets Can Fill The Space (Droplets That Hit Something Will Condense). 
Confirm The Flow Control Valve Is Set To Desired Setting, And Turn On The Fogger.
 
CLEANING THE FOGGER 
 
Normal Clean-Up: When Fogging Is Complete, Remove The Suction Tube From The Liquid Source And Operate The Fogger For One Minute With Valve Full Open. This Will Expel Any Liquid Remaining In The Fogger's Internal Lines. Transfer Excess Chemical From Tank To An Appropriate Container. 
Clean-Up Of Difficult Liquids: After Fogging A Viscous Liquid, Emulsion Or A Solid Suspension, Begin With A Normal Clean-Up (Step A). Then Put Suction Tube Into An Appropriate Solvent For Your Fogging Chemical (Water For Water-Dispersible Liquid, Kerosene For Oil Based Liquids) And Operate For 1-2 Minutes Flushing Residual Chemicals With Clean Solvents. Then Again Repeat Step A. 
Clean-Up For Long Term Storage: Remove All The Liquid From The Tank To Eliminate The Potential For Long Term Chemical Attack On Tank, Suction Tube Or Tubing. Then Follow Step A Or B.
 
ABOUT MOTOR BRUSHES  
 
Two Graphite Brushes Convey Electric Power To The Motor Commutator. Brushes Are A Consumable Item, And Have A Limited Lifetime Of Operating Hours, After Consumption Of Brushes Its Required To Replace The Old Brushes With New Ones. 
Operating Without The Air Intake Filter Lets Airborne Dirt And Moisture Enter The Motor; This Can Reduce Brush Life Substantially. When Brushes Are Worn The Motor Does Not Operate Properly
 
NOTE : When Carrying Fogger By Hand Move It Gently And Slowly In A Smooth Arc. Sudden Movements Can Impose Excessive Torque On Rapidly Spinning Fan Blades And Could Cause Premature Blade Failure